15cbm water sprinkler truck water tank vehicle supplier

15cbm water sprinkler truck water tank vehicle supplier

1. Product Overview

This SHACMAN water sprinkler truck is a multi-functional special vehicle designed for road cleaning, dust suppression, greening irrigation, and emergency fire-fighting. It is built on the reliable SHACMAN heavy-duty truck chassis, featuring a large-capacity water tank, high-pressure water pump, and flexible sprinkling system to meet various urban and rural environmental sanitation needs.

2. Technical Parameters

表格

Item Specification

Chassis Model SHACMAN F3000 6×4

Engine Power 430 HP

Water Tank Volume 20,000 – 25,000 Liters

Sprinkling Width 12 – 15 Meters

Sprinkling Pressure 0.3 – 0.6 MPa

Maximum Range (Cannon) 35 – 40 Meters

Fuel Type Diesel

3. Main Components & Functions

3.1 Water Tank

- Made of high-quality carbon steel with anti-corrosion coating, ensuring long service life.

- Equipped with a water inlet (top), outlet (bottom), and overflow valve to prevent overfilling.

- A manhole cover on the top allows for easy cleaning and maintenance of the tank interior.

3.2 Sprinkling System

- Side Sprinklers: Installed along the bottom of the tank for road wetting and dust suppression.

- Rear Sprinkler: Provides wide-area coverage for thorough road cleaning.

- High-Pressure Water Cannon: Mounted on the top rear, adjustable for angle and range, suitable for emergency fire-fighting and remote irrigation.

- Control Valves: Manually operated valves to switch between different sprinkling modes.

3.3 Chassis & Power System

- SHACMAN F3000 chassis with strong load capacity and stable performance.

- 430 HP diesel engine provides sufficient power for full-load operation.

- 6×4 drive configuration ensures good passability on various road conditions.

4. Operation Instructions

4.1 Pre-Operation Check

1. Check the engine oil level, coolant level, and fuel level to ensure they meet the standard.

2. Inspect the water tank for leaks and confirm the water level is within the safe range.

3. Test all sprinkling valves and the water cannon to ensure they operate smoothly.

4. Check the tire pressure and brake system for normal function.

4.2 Water Filling

1. Park the vehicle on a flat and stable surface, engage the parking brake.

2. Open the top water inlet cover and connect the water supply hose.

3. Start the auxiliary engine (if equipped) to accelerate filling, or use gravity filling.

4. Close the inlet cover once the tank is full, and check for any leaks.

4.3 Sprinkling Operation

1. Start the main engine and engage the power take-off (PTO) to drive the water pump.

2. Select the desired sprinkling mode (side, rear, or cannon) by opening the corresponding control valve.

3. Adjust the vehicle speed (usually 10–20 km/h) to control the sprinkling intensity.

4. For the water cannon, adjust the angle and nozzle to achieve the required spraying range and pattern.

5. After operation, disengage the PTO, stop the water pump, and close all valves.

4.4 Post-Operation Maintenance

1. Drain the remaining water from the tank and pipelines to prevent freezing in low-temperature environments.

2. Clean the sprinklers and water cannon to remove debris and sediment.

3. Perform routine chassis maintenance as per the SHACMAN truck manual.

4. Park the vehicle in a dry and ventilated area.

5. Safety Precautions

- Do not operate the sprinkling system while the vehicle is moving at high speed to avoid water splashing and potential accidents.

- Keep a safe distance from pedestrians and vehicles during operation to prevent water from splashing on passersby.

- Do not overfill the water tank, as this may affect vehicle stability and cause overflow.

- In case of pump failure or pipeline leaks, immediately stop operation and perform maintenance.

- Conply with local traffic regulations and environmental sanitation standards during use.

6. Troubleshooting

Fault Symptom Possible Cause Solution

No water sprinkling PTO not engaged, pump failure Engage PTO, inspect pump and valves

Weak water pressure Clogged filter or nozzle Clean filter and nozzles

Water leakage Loose valve or damaged pipe Tighten valves, replace damaged pipes

Cannon cannot reach far Low engine speed or clogged nozzle Increase engine speed, clean nozzle

7. Warranty & Service

This product is covered by the SHACMAN standard warranty. For any quality issues or maintenance needs, please contact the local SHACMAN authorized service center.

Would you like me to simplify this manual into a shorter, more user-friendly version for drivers, or adjust the technical parameters to match a specific tank volume